Building, Repairing, Upgrading? The hole your switch or light mounts in is critical. Before you grab that drill, or order parts, here’s some sizing information to help get the correct fit.
- The hole in the dash must take into consideration the dash covering and whether you wrap that cover into the hole or cut it out to the same diameter.
- The ‘finished’ diameter of the switch or component is given below. Your finished hole must accept this diameter
- The ‘bezel’ diameter is the outside diameter of the component, at the point it bears on the dash. If you are replacing a part with a different style switch, you’ll need to know this to make sure the new part doesn’t ‘pull through’ the existing hole when you assemble it.
- Need a custom size, we have all kinds of adapters available. Give us a call at (636) 422-0038 or drop us an email and let us help.